With Duo-Servo Drum Brakes

REMOVAL PROCEDURE
1. Remove the linings.
2. Disconnect the brake pipe from the rear of the master cylinder.
3. Remove the bolts.
4. Remove the wheel cylinder.

INSTALLATION PROCEDURE





1. Install the wheel cylinder.
2. Install the bolts.
^ Tighten the bolts to 25 Nm (18 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

3. Install the brake pipe.
^ Tighten the brake pipe fitting to 17 Nm (13 ft. lbs.).
4. Install the linings.