Frame, Field, and Brush Holder Group Disassembly Procedure

Frame, Field, And Brush Holder Group:

1. Move the brush holder assembly with the brushes slightly away from the frame and field assembly. Remove the insulated brush screws.
2. Remove the frame and field assembly.
3. Remove the grounded brush screws.
4. Remove any brushes that need replacement.
5. Inspect for any brush springs that need replacement. Remove the brush springs.
5.1. Grasp the brush end of each brush spring with needle-nose pliers.
5.2. Twist the spring end away from the brush and remove the brush.
6. Inspect and test all electrical components. Refer to Starter Motor Inspection (SD Series) or Starter Motor Inspection (28-MT Series). Testing and Inspection