Preset Scan (PSCAN)

^ Any stations already stored in preset memory can be sampled by the PSCAN mode.
^ In order to use PSCAN, press the PSCAN push button.
PSCAN will scan each of the presets and stop for a few seconds.
^ The AUTO TONE setting stored for that station will be automatically chosen.
^ The tuner will pause momentarily, then continue scanning until PSCAN or one of the preset push buttons is pressed again.
PSCAN will appear in the display whenever the tuner is in the PSCAN mode.
The channel number (P1-P6) will appear momentarily just before the frequency is displayed.