Radio Frequency Preset Push Buttons

Up to 14 stations can be preset into the radio's memory. In order to preset 4 AM and 4 FM stations, perform the following steps:
1. Tune into the desired radio station.
2. Press the SET push button. SET will appear on the display.
3. Press any station push button.
The SET on the display will go out. The radio will then tune into the selected station whenever that push-button is pressed.
4. If electrical power is interrupted (by a open fuse, discharged battery, service procedure, etc.), the station(s) and time of day must be reset.




In order to preset 3 additional AM, FM1, and FM2 stations, perform the following steps:
1. Tune into the desired radio station.
2. Press the SET push-button. SET will appear on the display.

Press any 2 adjacent station push buttons at the same time.

The SET on the display will go out. The station wilt return when the same two push buttons are pressed again.