Heating System

Air Distribution Ducts:

Remove or Disconnect

1. Negative battery cable.
2. Instrument cluster trim plate.
3. Radio.
4. Tilt back instrument panel assembly.
5. Duct mounting screws.
6. Duct from instrument panel.
- Squeeze the retainer in the component carrier compartment to release the duct.

Install or Connect

1. Duct to instrument panel.
2. Duct mounting screws.

Tighten
- Screws to 1.9 N.m (17 lb in).

3. Roll instrument panel forward.
4. Radio.
5. Instrument cluster trim plate.
6. Negative battery cable.