Instrument Panel Cluster Replacement

REMOVAL PROCEDURE





CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the instrument cluster bezel.
^ Four clips across the top edge, and tour clips across the bottom edge, retain the bezel.
^ For vehicles equipped with tilt wheel, move the steering column to the lowest position.
^ For vehicles without tilt wheel, you may have to lower the column.
^ Disconnect the electrical connectors from the headlamp switch and the dimmer control and accessory switches.




3. Remove the four screws that retain the instrument cluster.
4. Remove the instrument cluster from the vehicle. Keep fingers and other foreign objects away from the flexible circuit connections.

INSTALLATION PROCEDURE




1. Press the instrument cluster into the instrument panel.
2. Install the instrument cluster hold-down screws.
3. Connect the electrical connectors to the headlamp switch and the dimmer control and accessory switches.




4. Install the instrument cluster bezel.
5. Connect the negative battery cable.