High Mounted Stop Lamp Replacement, Roof Mounted

REMOVAL PROCEDURE
1. Remove the screws that retain the high mount stop lamp to the root.
2. Remove the high mount stop lamp from the vehicle.
3. Disconnect the electrical connector. Pull the body wiring harness connector through the hole in the roof and disconnect.

INSTALLATION PROCEDURE
1. Connect the body wiring harness connector. Push the connector through the hole in the roof in order to install the electrical connector.
2. Install the high mount stop lamp to the vehicle.
3. Install the screws that retain the high mount stop lamp to the roof.

Tighten
Tighten the high mount stop lamp screws to 1.4 N.m (12 lb in).