Bracket Replacement - Steering Column

Bracket Replacement - Steering Column




REMOVAL PROCEDURE

IMPORTANT: The upper steering column support bracket is not serviceable.

1. Remove the instrument panel.
2. Remove the brake switch.
3. Remove the brake booster pushrod from the brake pedal.
4. Remove the following upper steering column support bracket fasteners:
^ The 4 flange nuts
^ The 2 bolts
5. Remove the brake pedal from the upper steering column support bracket.

INSTALLATION PROCEDURE
1. Install the brake pedal to the upper steering column support bracket.

2. Install the upper steering column support bracket fasteners.

Tighten
^ Tighten the nuts to 25 Nm (18 lb ft).
^ Tighten the bolts to 25 Nm (18 lb ft).

3. Install the brake switch.
4. Install the brake booster pushrod to the brake pedal.
5. Install the instrument panel.