Piston and Connecting Rod Disassemble

^ Tools Required
- J 24086-C Piston Pin Remover/Installer





CAUTION: HANDLE THE PISTON CAREFULLY. WORN PISTON RINGS ARE SHARP AND MAY CAUSE BODILY INJURY.

1. Disassemble the piston rings. Use a suitable tool in order to expand the rings. Piston rings must not be reused.

IMPORTANT: Ensure that no load is put on the piston during disassembly.

2. Place the piston and the connecting rod assembly into the J 24086-C and press out the piston pin. Ensure that the flat side or inside of the piston is up when installing the piston and rod assembly into the fork.