Camshaft Installation

1. Apply clean engine oil or engine oil supplement to the following components:
^ The engine camshaft lobes
^ The camshaft bearing journals
^ The camshaft bearings

2. Install the three 5/16-18 x 4.0 inch bolts into the engine camshaft front bolt holes.

NOTICE: All camshaft journals are the same diameter, so care must be used in removing or installing the camshaft to avoid damage to the camshaft bearings.

3. Use the bolts as a handle in order to install the engine camshaft.
4. Remove the three bolts from the front of the engine camshaft.

NOTICE: Refer to Fastener Notice in Service Precautions.





5. Install the camshaft retainer and bolts.
^ Tighten the camshaft retainer bolts to 12 Nm (106 inch lbs.).