Control Door Lock Switches

LOCK
Voltage is available when any of the following switches are in the LOCK position:
^ The liftgate/unlock release
^ The left front power door lock
^ The right front power door lock

Voltage is available from the following components to cavity F of the door lock relay:
^ The CIG LTR fuse
^ CKT64O(ORN)
^ The door lock switch

The voltage energizes the lock relay coil. The lock relay coil allows the voltage to flow through the relay to the door lock motors. The voltage flow locks all of the doors. Ground for the left front door lock motor is through pin A of the remote control door lock receiver. The right front door lock motor and the side door lock motor receive the ground through pin H of the remote control door lock receiver. The rear door lock motor receives the ground through pin G of the remote control door lock receiver. The remote control door lock receiver grounds through the G200 body ground.

UNLOCK
Voltage is available when the following switches are in the UNLOCK position:
^ The liftgate lock/unlock release
^ The left front power door lock
^ The right front door lock

Voltage is available through the following components to the right front door lock motor and the side door lock motor:
^ The PWR ACCY circuit breaker
^ The door lock relay

The remote control door lock receiver supplies the voltage to the left front door lock motor and the rear door lock motor on CKT 294. The voltage unlocks the doors. The door lock relay supplies the ground for all motors to G200.