Component Tests and General Diagnostics

1. CHECK to see that the PWR ACCY Circuit Breaker 15 resetting. REPLACE if necessary.
2. CHECK that ground G110 is clean and tight.
3. CHECK that there are not any obstructions under the seat or in the carriages which nay affect Power Seat operation.
^ CHECK for a broken (or partially broken) wire inside of the insulation which could cause system 10 malfunction GOOD in a Continuity/Voltage check with a system disconnected. These circuits may be intermittent or resistive when loaded, and if possible, should be checked by monitoring for a voltage drop with the system operational (under load).
^ CHECK for proper installation of any aftermarket electronic equipment which may affect he integrity of other systems (Refer to Troubleshooting Procedures.) Diagnostic Aids