Stoplamps

Voltage is applied at all times from STOP/HAZ Fuse to the TCC/Stoplamp Switch. When the Brake Pedal is depressed, voltage is applied from the TCC/Stoplamp Switch through the Turn Signal Switch to WHT (17) wire turning ON the LH and RH Stoplamps. When the Brake Pedal is depressed, voltage is also applied from the TCC/Stoplamp Switch to the Center High Mounted Stoplamp (CHMSL) through the WHT (17) wire turning ON the CHMSL. The CHMSL is not affected by the Turn Signal Switch operation.