Wiper

The features of the Wiper System are ON, and Delay, the Rear Window Wiper/Washer System includes an operating mode in which the wiper makes single strokes with a time interval between strokes. The time interval is controlled by a Solid-State Rear Window Wiper/Washer Module. In the ON position, the Rear Window Wiper/Washer Switch supplies voltage to the Window Wiper/Washer Module through CRY (391) wire. The Rear Window Wiper/Washer Module provides ground from Ground C403 through the BLK (1450) wire for the Rear Window Wiper System. With the Rear Window Wiper/Washer Switch in the Delay position, battery voltage is supplied from LT BLU (97) wire and CRY (391) wire, the Wiper runs at the non-adjustable delay interval. When the Rear Window Wiper/Washer Switch is turned to the ON position, the Wiper completes the last sweep and stops in the Park position.