Shift Lever

Standard Steering Column (Part 1 Of 2):

Standard Steering Column - Legend (Part 2 Of 2):

REMOVE OR DISCONNECT
1. Roll shift lever boot back until TORX(R) head screw is exposed.
2. TORX(R) head screw.
3. Shift lever.

INSTALL OR CONNECT
1. Shift lever.
2. TORX(R) head screw.

Tighten
- Screw to 22 N.m. (29 lb in).

3. Roll shift lever boot over TORX(R) head screw.