LH Front Power Window Master Switch Operation

When the Ignition Switch is in the RUN position, battery voltage is supplied to the Window Switch through the WINDOWS Circuit Breaker and the YEL (343) wire. When the LH UP position in the Window Switch is pressed, Battery voltage is supplied to the LH Window Motor through the DK BLU (164) wire. The Motor is grounded through the BRN (165) wire, DN contact in the Window Switch. The Motor runs to drive the window up.

When the LH DN position in the Window Switch is pressed. Battery voltage is supplied to the Window Motor in the opposite direction through the BRN (165) wire. The Window Motor is grounded through the DK BLU (164) wire. the UP contact in the Window Switch. The DK BLU (166) wire and the UP contact in the Front Power Window Master Switch. The Motor runs to drive the window down.

When the RH UP position in the Window Switch is pressed, battery voltage is supplied to the RH Window Motor through the DK BLU (166) wire and the UP contact in the passenger Window Switch through the DK BLU (666) wire to the Window Motor. The Motor is grounded through the BRN (667) wire, DN contact in the Passenger Window Switch through the TAN (167) wire to the BLK (750) wire to Ground G110.

When the RH DN position in the Window Switch is pressed, battery voltage is supplied to the RH Window Motor on the opposite direction through the TAN (167) wire and the DN contact in the passenger Window Switch through the BRN (667) wire to the Window Motor, the Motor is grounded through the DK BLU (666) wire, UP contact in the passenger Window Switch through the DK BLU (166) wire and the UP contact in the Driver Window Switch to the BLK (750) wire to Ground G110.