Instrument Panel Cluster Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.






1. Disconnect the negative battery cable.
2. Remove the instrument panel cluster trim plate.
3. Tilt the steering column fully down, if equipped with tilt steering.
4. Remove the screws (2) that retain the instrument cluster to the instrument panel carrier
5. Remove the instrument cluster (1) from the vehicle.

INSTALLATION PROCEDURE






1. Position the instrument cluster (1) to the vehicle.

NOTICE: Refer to Fastener Notice in Cautions and Notices.

2. Install the screws (2) that retain the instrument cluster to the instrument panel carrier.

Tighten
Tighten the screws to 2 N.m (18 lb in).

3. Install the instrument panel cluster trim plate.
4. Tilt the steering column to the up position, if equipped with tilt steering.
5. Connect the negative battery cable. Refer to Battery Cable Replacement (Battery Disconnect/Connect) in Engine Electrical. Service and Repair