General Information

1. In order to play a tape, the ignition switch must be in the ACCESSORY or RUN position and the receiver must be turned ON.
Tapes are end-loaded into the cassette player.
2. Insert the tape squarely through the door, exposed tape side of the cassette facing to the right.
3. When the tape is fully inserted, the AM/FM portion of the radio will turn off and the tape will begin playing.
4. The tape player works best with tapes that are 30-45 minutes long on each side. Longer running tapes may not work well in these players because they are usually too thin.
5. Once the tape is playing, the volume, balance and fade knobs operate the same as with the radio. An arrow indicates which side of the tape is being played.