Park/Turn Signal Lamp Replacement (Uplevel Vehicles)

REMOVAL PROCEDURE


1. Remove the screws (4) that retain the park/turn signal lamp to the radiator grille.
2. Remove the park/turn signal lamp (3) from the radiator grille.
3. Disconnect the bulb socket(s) (1) from the park/turn signal lamp.
4. Remove the bulb(s) (1) from the socket.

INSTALLATION PROCEDURE


1. Connect the bulb(s) (1) into the socket.
2. Connect the bulb socket(s) (1) into the park/turn signal lamp.
3. Install the park/turn signal lamp (3) to the radiator grille (5).
4. Install the park/turn signal lamp retaining screws (4) to the radiator grille.