W/O Passenger SIR

Description:

1. Install the inflatable restraint IP trim cover (2)10 the IP carrier (1).
2. Install the inflatable restraint IP trim cover mounting fasteners (3).
Tighten
Tighten fasteners to 10 Nm (89 lb. in). Refer to Fastener Notice in Vehicle Damage Warnings.
3. Connect the inflatable restraint IP trim cover pigtail connector.
4. Install the Connector Position Assurance (CPA) to the inflatable restraint IP trim cover harness connector.
5. Install the passenger knee bolster.
6. Enable the SIR system.