Breather

REMOVAL PROCEDURE





1. Remove the vent hose bolt and the clamp.
2. Remove the strap securing the vent hose to the transmission and the wiring harness.
3. Remove the vent hose from the transmission vent.

INSTALLATION PROCEDURE





1. Install the vent hose to the transmission.
2. Install the strap that secures the vent hose and the wiring harness to the transmission.
3. Install the bolt and the clamp.
^ Tighten the bolt to 10 Nm (89 inch lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.