Disabling Theftlock

IMPORTANT: If more than 15 seconds elapse between any of the steps, the radio automatically reverts to time and you must start the procedure over from step 3.

In order to disable the Theftlock(TM) feature, enter the user code as follows:
1. Turn the ignition to ACCESSORY or RUN.
2. Turn the radio OFF.
3. Press the 1 and 4 buttons together. Hold then down until SEC appears on the display.
4. Press MN and 000 will appear on the display.
5. Press and hold MN until the last two digits agree with the user code.
6. Press and hold HR until the first one or two digits agree with the user code.
7. Press the AM/FM push button after you have confirmed that the code matches the one you wrote down. If REP appears on the display, repeat steps 4 through 7.
8. The display will show - -,indicating that the radio is no longer secured.
9. If the code is entered incorrectly, SEC appears on the display.
10. The radio will remain secured until the correct code is entered.