Operation CHARM: Car repair manuals for everyone.
Home >> GMC Truck >> 1998 >> Savana 1/2 Ton Van V6-4.3L VIN W >> Repair and Diagnosis >> Transmission and Drivetrain >> Automatic Transmission/Transaxle >> Service and Repair >> Overhaul >> 4L60-E Automatic Transmission >> Repair Instructions >> Turbine Shaft Seals Installation

Turbine Shaft Seals Installation

INSTALLATION PROCEDURE

- Tools Required
- J 36418-1 Turbine Shaft Seal Installer
- J 36418-2A Turbine Shaft Seal Sizer





1. Use the J 36418-1 in order to install the four turbine shaft oil seal rings.
2. Place the J 36418-2A over the turbine shaft oil seal rings. Leave the J 36418-2A on the shaft until the reverse input clutch must be installed on the input clutch.

pro multis · About Operation CHARM