Valve Rocker Arm Stud Removal

^ Tools Required
- J 5802-01 Rocker Arm Stud Remover





1. Place the J 5802-01 over the valve rocker arm ball stud to be removed.
2. Install a nut and a flat washer.
3. Rotate the nut clockwise to remove the valve rocker arm ball stud.
Valve rocker arm ball studs that have damaged threads or are loose in cylinder heads should be replaced.
Valve rocker arm ball studs are pressed into the cylinder head.
New valve rocker arm ball studs are available in 0.0762 mm (0.003 inch) and 0.3302 mm (0.013 inch) oversize.