Cargo Lamp: Service and Repair

REMOVAL PROCEDURE
1. Make sure the headlamp switch is in the OFF position.
2. Remove the lens screws (1).
3. Remove the lens (2).
4. Remove the bulb (4).
5. Remove the lamp assembly screws (1).
6. Remove the lamp assembly (3) from the root.
7. Disconnect the wiring harness (5) from the lamp assembly.
8. Remove the gasket (7) from the roof.

INSTALLATION PROCEDURE
1. Install the gasket (3) to the roof.
2. Connect the wiring harness (5) to the lamp assembly (3).
3. Install the lamp assembly to the roof.
4. Install the lamp assembly screws (1).
5. Install the bulb (4).
6. Install the lens (2).

NOTE: Refer to Fastener Notice in Cautions and Notices.

7. Install the cargo lamp retaining screws (1).

Tighten
Tighten the cargo lamp retaining screws to 2.0 N.m (17 lb in).