Dome Lamp: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable(s).
2. Remove the lens (5).
3. Remove the bulb (2).
4. Remove the housing screws (6).
5. Remove the lamp assembly (4).
6. Disconnect the electrical connector (1).
7. Remove the bezel (3).

INSTALLATION PROCEDURE
1. Install the bezel (3).
2. Connect the electrical connector (1).
3. Install the lamp assembly (4).
4. Install the housing screws (6).
5. Install the bulb (2).
6. Install the lens (5).
7. Connect the negative battery cable(s).