Fog Lamp Replacement - Front

REMOVAL PROCEDURE

CAUTION: Halogen bulbs contain gas under pressure. Handling a bulb improperly could cause it to shatter into flying glass fragments. To help avoid personal injury:
- Turn off the lamp switch and allow the bulb to cool before changing the bulb Leave the lamp switch off until the bulb change is complete.
- Always wear eye protection when changing a halogen bulb.
- Handle the bulb only by its base. Avoid touching the glass.
- Do not drop or scratch the bulb.
- Keep dirt and moisture off the bulb.
- Place the used bulb in the new bulb's carton and dispose of it properly.
- Keep halogen bulbs out of the reach of children

1. Remove the 2 screws from the front lamp assembly.
2. Remove the lens from the front lamp assembly.
3. Twist the bulb to the left.
4. Remove the bulb.

INSTALLATION PROCEDURE
1. Install the bulb into the lamp assembly.
2. Twist the bulb to the right.
3. Install the lens.
4. Install the 2 screws.