100000 MI or 160000 KM
LubricateSteering and Suspension
Lubricate the chassis components. Lubricate the front suspension, ball joints, steering linkage, transmission shift linkage, transfer case shift linkage, parking brake cable guides, rear driveline center splines. Ball joints should not be lubricated unless their temperature is -12 degrees C (10 degrees F) or higher or they could be damaged.
Inspect
Radiator Cooling Fan
If your engine has a thermostatically controlled cooling fan, inspect hoses and ducts for proper hook-up (or every 12 months, whichever occurs first). Be sure the valve works properly.
Fluid - Differential
Inspect front/rear axle fluid level and add fluid as needed.
Brakes and Traction Control
Air Cleaner Housing
Inspect the air intake system installation to assure that gaskets are properly sealed and that all hose connections, fasteners and other components are tight. Also check to be sure that the air cleaner housing is properly seated and the cover fits tightly. Tighten connections and fasteners or replace damaged parts as necessary.
Replace
Oil Filter, Engine
Or every 3 months, whichever occurs first.
Fluid Filter - A/T
Fluid - A/T
Only if the vehicle's GVWR is over 8600 lbs.
Engine Oil
Or every 3 months, whichever occurs first.
Rotate
Tires
Flush
Cooling System
Drain, flush and refill cooling system with coolant. Inspect the coolant hoses and replace the hoses if the following conditions exist; cracking, swelling, deterioration. Tighten all of the clamps (except the constant tension clamps). Remove debris and clean the outside of the radiator and air conditioning condenser. Wash the radiator neck. Pressure test the radiator and the cap.