Lubricant Change

REMOVAL PROCEDURE





1. Remove the front differential carrier shield, if equipped. Refer to Shield Replacement.





2. Remove the fill plug (1) and the washer (2).
3. Remove the drain plug (3).
4. Drain the fluid from the differential.

INSTALLATION PROCEDURE





1. Install the drain plug (3).
^ Tighten the drain plug (3) to 33 Nm (24 ft. lbs.).

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Fill the differential. Refer to Lubrication Specifications.
3. Install the washer (2) and the fill plug (1).
^ Tighten the fill plug (1) to33 Nm (24 ft. lbs.).





4. Install the front differential carrier shield. Refer to Shield Replacement.