Seat Back Cover and Pad Replacement - Rear

REMOVAL PROCEDURE



1. Remove the rear seat from the vehicle.




2. Remove the headrests (2).




3. Release the seat back trim cover J-clip. Pull back the trim cover in order to expose the seat back side bolts (1).
4. Remove the seat back side bolts.
5. Remove the seat back frame from the seat.




6. Pull up the trim cover in order to expose the head rest guides (1).
7. Remove the head rest guides.
8. Remove the trim cover (4).
9. Separate the foam pad (3) from the seat back frame.
10. Remove the seat back frame from the vehicle.

INSTALLATION PROCEDURE



1. Attach the foam pad (3) to the seat back frame.
2. Pull the trim cover (4) over the seat.
3. Install the head rest guides (1).

Notice: Refer to Fastener Notice in Cautions and Notices.




4. Install the side bolts (1).

Tighten
Tighten the bolts to 35 N.m (26 lb ft).

5. Connect the seat back trim cover J-clip.




6. Install the headrests (1).




7. Install the rear seat in the vehicle.