Turn Signal & Multifunction Switch - Disassemble

DISASSEMBLY PROCEDURE





1. Remove the upper and lower shrouds.
2. Pop the wire harness assembly (4) out of the wire harness strap (5).
Remove the wire harness straps (3) from the wire harness assembly (4).
Remove the wire harness strap (2) from the steering column support assembly (1).





3. Slide the 2 connectors (2) of the turn signal and multifunction switch assembly off of the bulk head connector (1).





4. Remove the 2 pan head tapping screws (1).
5. Remove the turn signal and multifunction switch assembly (2).