Fog Lamp Replacement - Front (Base)

REMOVAL PROCEDURE
1. Disconnect the electrical connector (3) from the tog lamp.
2. Remove the push pin retainers that attach the fog lamp to the bracket.
3. Remove the fog lamp adjuster bolt and spring from the adjuster nut.
4. Remove the tog lamp from the fog lamp bracket.
5. Remove the tog lamp bracket bolts and bracket, as needed.

INSTALLATION PROCEDURE

NOTE: Refer to Fastener Notice in Cautions and Notices.

1. Install the tog lamp bracket bolts and bracket, as needed.

Tighten
Tighten the fog lamp bolt to 25 N.m (18 lb ft).

2. Install the fog lamp to the fog lamp bracket.
3. Install the fog lamp adjuster bolt and spring to the adjuster nut.
4. Install the push pin retainers that attach the fog lamp to the bracket.
5. Connect the electrical connector (3) to the tog lamp.
6. Reaim the fog lights. Refer to Fog Lamp Aiming Procedure (Base, Luxury). Fog Lamp Aiming Procedure