Seat Replacement - Front Bucket

REMOVAL PROCEDURE
1. Move the seat to the full forward position and remove the front seat adjuster bolt insulator (3), if equipped.
2. Remove the seat retaining rear bolts (1).
3. Move the seat to the full rearward position in order to remove the seat retaining front nuts (2).
4. Disconnect the electrical harness, if equipped.
5. Remove the seat from the vehicle.

INSTALLATION PROCEDURE
1. Position the seat in the vehicle.
2. Connect the electrical harness, if equipped.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Move the seat to the full forward position in order to install the seat retaining rear bolts (1).

Tighten
Tighten the retaining rear bolts to 55 N.m (41 lb ft).

4. Install the front seat adjuster bolt insulator (3), if equipped.
5. Move the seat to the full rearward position and install the seat retaining front nuts (2).

Tighten
Tighten the nuts to 55 N.m (41 lb ft).