Seat Replacement - Rear Bench

REMOVAL PROCEDURE
1. Pull the seat belt buckles through the seat cushion and seat back.
2. Fold the seat up.
3. Remove the seat retaining bolts (1).
4. Lift the rear seat from the retaining hooks.
5. Remove the seat from the vehicle.

INSTALLATION PROCEDURE
1. Place the seat back clips on the retaining hooks.
2. Fold the seat down.

Notice: Refer to Fastener Notice in Cautions and Notices.

3. Install the seat retaining bolts (1).

Tighten
Tighten the bolts to 55 N.m (41 lb ft).

4. Pull the seat belt buckles through the seat cushion and seat back.