General Description Exhaust System

Exhaust system designs vary according to the engine designation and intended use of the vehicle.

The exhaust system may use spherical seals in order to secure the exhaust pipe to the engine manifold.

Other connections on the gasoline engine exhaust system use a flat flange and gasket, while the diesel engine uses a slip joint coupling design with a clamp and U-bolt.

The exhaust system is suspended by hangers attached to the frame members. These allow some movement of the exhaust system and minimize the transfer of noise and vibration into the vehicle.

There is a variety of hangers used, depending on the engine, the wheel base, and the applicable exhaust system. Remove the hangers during the replacement procedures, as needed.