Blower Motor & Fan Replacement-Auxiliary(4-Door Utility)

REMOVAL PROCEDURE





CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the right rear quarter trim panel.
3. Disconnect the electrical connectors.
4. Remove the screws (2) securing the blower motor (3).
5. Remove the blower housing/motor assembly.
6. Remove the blower motor from the blower housing.




7. Remove the fan cage from the motor.

INSTALLATION PROCEDURE




1. Install the fan cage to the motor.




2. Install the blower motor (3) to the blower housing.
3. Install the blower housing to the case.

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the screws (2).

Tighten
Tighten the screws to 1.9 N.m (18 lb in).

5. Connect the electrical connectors as necessary.
6. Install the right rear quarter trim panel.
7. Connect the negative battery cable.
8. Test the check circuit operation.