Extended Cab With 3RD Door

Installation Procedure
1. Install the buckle assembly to the floor panel stud.

Notice: Refer to Fastener Notice in Cautions and Notices.

2. Install the nuts to the buckle assembly.

Tighten
Tighten the nuts to 42 N.m (31 lb ft).





3. Install the bolt through the seat belt retractor to the weld nut.

Tighten
Tighten the bolt to 55 N.m (41 lb ft).





4. Install the quarter trim panel.
5. Install the bolt to the upper anchor plate.

Tighten
Tighten the bolt to 55 N.m (41 lb ft).

6. Install the rear seat.