Rear Overhead

REMOVAL PROCEDURE
1. Remove the speaker grille.
2. Remove the roof inner trim panel, if necessary.
3. Remove the screws.
4. Remove the speaker from the bracket.
5. Disconnect the electrical connectors, as necessary.

INSTALLATION PROCEDURE
1. Connect the electrical connectors, as necessary.
2. Install the speaker to the bracket.

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the screws.

Tighten
Tighten the screws to 2 N.m (18 lb in).

4. Install the roof inner trim panel, if necessary.
5. Install the speaker grille.
6. Verify the component's operation.