Horn: Service and Repair

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the battery.
3. Disconnect the electrical connector.
4. Remove the horn attaching bolt (2).
5. Remove the horn (1) from the vehicle.

INSTALLATION PROCEDURE
1. Install the horn (1) to the vehicle.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the horn attaching bolt (2).

Tighten
Tighten the bolt to 25 N.m (18 lb ft).

3. Connect the electrical connector.
4. Install the battery.
5. Connect the negative battery cable.