Instrument Panel Cluster (IPC) - Bezel Replacement

REMOVAL PROCEDURE
1. Apply the parking brake to prevent the vehicle from moving.
2. Move the shift lever all the way down (if the transmission is automatic).
3. Tilt the steering wheel to the full down position.
4. Pull gently rearward on the clips holding the bezel to the Instrument Panel (IP) assembly.
5. Remove the bezel.

INSTALLATION PROCEDURE
1. Position the bezel to the IP assembly.
2. Attach the bezel to the IP assembly by pushing gently on the clips on the top and the bottom of the bezel.
3. Tilt the steering wheel to the normal drive position.
4. Move the shift lever to the park position (if the transmission is automatic).
5. Disengage the parking brake.