Front Axle Will Not Disengage

Front Axle Will Not Disengage

Test Description

The number(s) below refer to the step number(s) on the diagnostic table.

3. This step determines if the front axle actuator has a good power and ground supplied to it.
4. This step determines if the transfer case shift control module is providing the ground signal to the front axle actuator through terminal B in order to drive the front axle actuator motor.
5. This step determines if the transfer case shift control module is able to sense voltage on CKT 1695.
6. This step determines if the front axle switch is suppling power to the transfer case shift control module.

Front Axle Will Not Disengage