Shift Lever - Without Tow/Haul Switch

REMOVAL PROCEDURE





1. Roll back the seal until the TORX head screw (2) is exposed.
2. Remove the TORX head screw (2).
3. Remove the shift lever (1).

INSTALLATION PROCEDURE





1. Install the shift lever (1).
2. Install the TORX head screw (2).

NOTICE: Refer to Fastener Notice in Service Precautions.

- Tighten the screw to 22 Nm (116 ft. lbs.).

3. Roll the seal over the TORX head screw (2).