Remote CD Player Replacement

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the instrument panel trim.
3. Use a small screwdriver in order to release the radio retainers.
4. Remove the playback device.
5. Remove the electrical connectors.

INSTALLATION PROCEDURE
1. Connect the electrical connectors.
2. Install the playback device.
3. When the playback device is fully seated, snap the unit into the retainers.
4. Install the accessory trim plate.
5. Connect the negative battery cable.
6. Verify the component operation.