92. Oil Level Indicator and Tube Installation

1. Install the oil level indicator tube (3) and NEW O-ring (4) into the oil pan (5).

NOTICE: Refer to Fastener Notice in Service Precautions.

2. Properly position the oil level indicator tube (1) and install the oil level indicator tube bracket nut (2) to the right exhaust manifold stud.
^ Tighten the oil level indicator tube bracket nut to 54 Nm (40 lb ft).
3. Install the oil level indicator into the oil level indicator tube.
4. In order to prevent rub conditions from occurring ensure the correct orientation of the following:
^ Spark plug wires
^ Ignition coil harness
^ Fuel injector harness
^ ECT sensor wire harness
^ Vacuum hoses
^ Coolant hoses