53. Oil Pump Disassemble

1. Remove the oil pump drive shaft retainer.
2. Remove the oil pump drive shaft.





3. Remove the roll pin.
4. Remove the pressure regulator valve.
5. Remove the spring.





IMPORTANT: If the pick-up tube and screen is not damaged, do not remove it. A new pick-up tube and screen assembly will be required for reassemble. The tube is press-fit into the cover and is hard to remove without damaging it.

6. Remove the pick-up tube and screen assembly if necessary.
7. Remove the oil pump cover bolts.





8. Remove the oil pump cover.
9. Remove the spacer plate.





10. Mark the gear teeth in order to install the pump gears with the same gear teeth index.
11. Remove the drive gear.
12. Remove the shaft.
13. Remove the driven gear.
14. Remove the idler shaft.