Front Floor Console (Luxury)

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Remove the negative battery cable.
2. Remove the floor console from the vehicle.
3. Remove the console to speaker bolts.
4. Disconnect the electrical connector from the front floor console speaker, this is a small 2 pin connector located on the end of the speaker.
5. Remove the speaker from the console.

INSTALLATION PROCEDURE
1. Install the front floor console speaker to the console.

NOTE: Refer to Fastener Notice in Cautions and Notices.

2. Install the console to speaker bolts.

Tighten
Tighten the console to speaker bolts to 6 N.m (53 lb in).

3. Install the electrical connector to the console speaker.
4. Install the floor console to the vehicle.
5. Install the negative battery cable.