Blower Motor Replacement - Auxiliary

REMOVAL PROCEDURE

CAUTION: Refer to Battery Disconnect Caution in Cautions and Notices.

1. Disconnect the negative battery cable.
2. Remove the right rear quarter trim panel.
3. Disconnect the electrical connectors, as necessary.
4. Position the blower motor (2) in order to remove the blower motor fan.
5. Remove the screws.
6. Remove the blower motor tan retaining nut.
7. Remove the blower motor fan.
8. Remove the blower motor.

INSTALLATION PROCEDURE
1. Install the blower motor (2).
2. Install the blower motor fan.
3. Install the blower motor fan retaining nut.

NOTE: Refer to Fastener Notice in Cautions and Notices.

4. Install the screws.

Tighten
Tighten the screws to 1.4 N.m (12 lb in).

5. Connect the electrical connectors, as necessary.
6. Remove the right rear quarter trim panel.
7. Connect the negative battery cable.
8. Verify the circuit operation.