Headlamp Replacement (Luxury)

REMOVAL PROCEDURE
1. Make sure the headlamp switch in the OFF position.
2. Remove the park/[1][2]turn signal lamp assembly.
3. Remove the headlamp assembly pins from the top of the radiator support.
4. Pull forward the headlamp from the assembly (3).
5. Disconnect the electrical connector from the headlamp.
6. Remove the headlamp from the vehicle.

INSTALLATION PROCEDURE
1. Connect the electrical connector to the headlamp.
2. Install the headlamp assembly to the vehicle..

NOTE: Refer to Fastener Notice in Cautions and Notices.

3. Install the headlamp assembly pins.

Tighten
Tighten the assembly pins to 5 N.m (44 lb in).

4. Install the park/[1][2]turn signal lamp assembly (3).