Crankshaft, Engine
| Crankshaft Journal (Main) | OD (White) (1-4) | 2.9524 - 2.9527 Inch (in) |
| OD (White) (5) | 2.9522 - 2.9525 Inch (in) | |
| OD (Orange Or Red) (1-4) | 2.9520 - 2.9524 Inch (in) | |
| OD (Orange Or Red) (5) | 2.9518 - 2.9522 Inch (in) | |
| OD (Blue) (1-4) | 2.9517 - 2.9520 Inch (in) | |
| OD (Blue) (5) | 2.9515 - 2.9518 Inch (in) | |
| Taper | 0.0033 Inch (in) Mqaximum | |
| Out-Of-Round | 0.0033 Inch (in) Maximum | |
| Bearing Clearance (1-4) | 0.0018 - 0.0033 Inch (in) | |
| Bearing Clearance (5) | 0.0022 - 0.0037 Inch (in) | |
| Crankshaft Journal (Rod) | OD (Yellow) | 2.4000 - 2.4010 Inch (in) |
| OD (Green) | 2.3990 - 2.4000 Inch (in) | |
| Taper | 0.0018 - 0.0033 Inch (in) Maximum | |
| Out-Of-Round | 0.0018 - 0.0033 Inch (in) Maximum | |
| Bearing Clearance | 0.0014 - 0.0035 Inch (in) | |
| Side Clearance | 0.0020 - 0.0120 Inch (in) | |
| End Play | 0.0039 - 0.0010 Inch (in) | |
| Crankshaft Bearing (Main). | Select Fit | |
| White (1) | STD inch Case STD inch Cap ,STD inch Case, STD inch Cap | |
| White (2) | 0.013 mm U.S. inch Case STD inch Cap, 0.0005 inch U.S. inch Case, STD inch Cap | |
| White (3) | 0.026 mm U.S. inch Case, STD inch Cap 0.0010 inch U.S. inch Case, STD inch Cap | |
| Orange Or Red (1) | STD inch Case, 0.013 mm U.S. inch Cap STD inch Case, 0.0005 inch U.S. inch Cap | |
| Orange Or Red (2) | 0.013 mm U.S. inch Case, 0.013 mm U.S. inch Cap 0.0005 inch U.S. inch Case, 0.0005 inch U.S. inch Cap | |
| Blue (1) | STD inch Case, 0.026 mm U.S. inch Cap STD inch Case, 0.0010 inch U.S. inch Cap | |
| Blue (2) | 0.013 mm U.S. inch Case, 0.026 mm U.S. inch Cap 0.0005 inch U.S. inch Case, 0.0010 inch U.S. inch Cap | |
| Blue (3) | 0.026 mm U.S. inch Case, 0.026 mm U.S. inch Cap 0.0010 inch U.S. inch Case, 0.0010 inch U.S. inch Cap | |
| Crankshaft Bearing (Rod)-Select Fit Refer To Crankshaft And Bearings Installation (L65). | Yellow | STD inch Rod, STD inch Cap STD inch Rod, STD inch Cap |
| Green | STD inch Rod, 0.026 mm U.S. inch Cap STD inch Rod, 0.0010 inch U.S. inch Cap | |
| Crankshaft Bearing Cap Bolts | (Inner Bolts-12 mm ) First Pass | 55 Foot Pound-Force (ft.lb) |
| (Inner Bolts-12 mm ) Second Pass | 55 Foot Pound-Force (ft.lb) | |
| (Inner Bolts-12 mm ) Final Pass | 90 deg. | |
| (Outer Bolts-12 mm ) First Pass | 148 Foot Pound-Force (ft.lb) | |
| (Outer Bolts-1 2 mm ) Second Pass | 148 Foot Pound-Force (ft.lb) | |
| (Outer Bolts-1 2 mm ) Final Pass | 90 deg. | |
| (Outer Bolts-1 0 mm ) Single Pass | 30 Foot Pound-Force (ft.lb) |