HVAC System - Automatic

REMOVAL PROCEDURE

1. Remove the instrument panel accessory trim plate.
2. Remove the control assembly retaining screws.
3. Depress the control assembly retaining tabs and remove the control assembly from the instrument panel.
4. Disconnect the electrical connectors from the control assembly.
5. Remove the control assembly bulb from the control assembly and retain.

INSTALLATION PROCEDURE
1. Install the control assembly bulb to the control assembly.
2. Connect the electrical connectors to the control assembly.
3. Install the control assembly into the instrument panel, ensuring that the control assembly retaining tabs lock into place.
4. Install the control assembly retaining screws.
5. Install the instrument panel accessory trim plate.